How the estimate works
Energy in kWh = watts ÷ 1,000 × hours per day × days. Cost = kWh × your price per kWh. For example, 1,000 watts running four hours a day for 30 days uses 120 kWh. At $0.18/kWh, the energy charge is $21.60.
Use heating time, not just plugged-in time
A heater with a thermostat cycles on and off. Four hours at full power is different from four hours connected to the wall. At 1,500 watts, four full-power hours consume 6 kWh. At the illustrative rate of $0.18/kWh, that is $1.08 a day and $32.40 for 30 days. Seasonal use should not be mistaken for a year-round expense.
What this estimate leaves out
The calculator uses constant power and a single electricity rate. It does not model startup surges, changing settings, tiered rates, demand charges, taxes, or fixed account fees. Enter average measured watts when possible. Use a separate calculation for each time-of-use rate period. All amounts are in U.S. dollars.
Common questions
Does leaving it plugged in mean it uses full power?
No. Standby and active power differ. Use measured consumption or the correct operating mode rather than assuming full rated power continuously.
Can I use my total bill divided by kWh?
That gives an effective whole-bill average. It can overstate the additional cost of an appliance if your bill includes fixed fees. For incremental running costs, use the variable per-kWh charges.
Calculation sources
U.S. Department of Energy: Electricity 101 · DOE energy education: kWh formula
Published September 17, 2026. Formulas are shown so you can check the arithmetic. Examples are illustrative and are not appliance testing results.
Read the electricity cost guide →